Right click on the Ethernet adapter and select Properties.or Go to Settings -> Network & Internet -> Change adapter options.Click on the Start button -> Type ncpa.cpl and hit OK. ![]() Note: The IP range mentioned here is only for reference and you can set it to any number, but make sure the IP addresses have the same range.Īssign a static IP address in Windows PC or Laptop: Select the Ethernet port or External USB Ethernet Adapter.The process of setting up the static IP address on Mac is quite different compared to Windows PC.Īssign a static IP address in Mac or MacBook: This step involves setting up a static IP address to Mac or Windows computer. Enable the option Set as default gatewayĪssign Static IP Address Assign a Static IP Address to Mac or Windows PC.Select Network Interface from the Network Settings.The LAN Port 2 is connected to the Router and the LAN Port 1 is connected to MacBook Pro via Ethernet port. Here, I have used Synology DS220+ to demonstrate the process. In case you missed it: Synology BeeDrive Review: The Ultimate SSD for Seamless Storage and Effortless Backup Synology Control Panel ![]() The process is almost the same for all Synology NAS devices. ![]() This step involves assigning a Static IP address to your Synology NAS. Access NAS over Ethernet using Synology Assistant Assign a Static IP Address to NAS Assign a static IP address to Mac or Windows PCģ. Check out this tutorial to set up your newly bought Synology DS220+ or any other Synology NAS.Ģ. You can change the IP address of your PC but not the IP address of NAS unless you have access to NAS. Else, you’ll not be able to access the NAS. When you connect Synology NAS directly to Mac or Windows computer over ethernet, both NAS and the PC have to be on the same IP address to communicate with each other.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |